OLE Z5020 Tank Gauge Flammable Liquids c/w Probe for tanks up to 3m in height
Skip to product information
1 of 1

Installation

With simplicity in mind, the Z5020 system can be installed in less than 1 hour.åÊ Sensor into tank, wired to display, mounted on wall or pipe. Plug in lap top configuration. Test Alarm and scroll screen‰Û?.

Power supply can be 24vdc, so no mains power required at fill point to power gauge system. (Multi power supply included, 12/24vdc or 100/240 vac)

  • GO Data Sheet OLE Z5020
  • GO Wiring Diagram OLE Z5020
  • GO Manual OLE Z5020 Configuration Communication Initial Set-Up
  • GO Manual OLE Z5020 Configuration Step by Step Guide
  • GO Manual OLE Z5020 Config Record Sheet
  • GO Manual OLE Z5020 Modbus Documentation V1 12 firmware 2017
  • GO Manual OLE Z5020 Strapping table guide

Inputs / Outputs

  • Power Supply 18-24 vdc (with optional 110-240 vac power supply)
  • Input : 1 x Tank Sensor 4-20 mA (new or existing measuring sensor)
  • Input : 2 x Digital inputs, Normally Closed (H and B Alarms)
  • Output: 1 x Modbus RS485 with registers for all features
  • Output: 1 x 4-20 Output: 4-20 mA proportional to Litres Capacity.
  • Output: 4 x Level Triggers. 24vdc as std, or Volt Free Relay Option
  • Output: 1 x Bund Condition Digital condition (NC To BMS)
    • Accuracy +/- 0.25% or better.
    • Two (2) Year Warranty
    • Litres Display and % Bar and Alarm Status
    • 4-20 mA output for BMS + Modbus RTU as standard
    • Suitable for any height / shape of Tank.
    • Low Installation & Maintenance Costs
    • IP65 weatherproof enclosure
    • Alarm Test Functions Two button auto reset operation
    • Single power connection for multi-functions
    • Replaces separateåÊ Gauge, High / Low /Bund Alarms
    • Adjustable Screen Resolution
    • Adjustable Safe Fill Level Setting
    • Suitable with petrol, kerosene, diesel, biodiesel up to B100, AdBlue & antifreeze (coolant)
    • Tank probes are an electronic pressure sensor with a 1" BSPT male fitting.
    • Level probes must be suspended 50mm from the bottom of the tank.
    • 1 gauge required per tank. Slave display option available.
    • Options- Choose between bund probe or water bottom sensor
    • Relay board fits inside gauge housing, 4 volt free outputs
    pagination here

OLE Z5020 Tank Gauge Flammable Liquids c/w Probe for tanks up to 3m in height

SKU: Z5020-1ATEX-A12

OLE Z5020 Tank Gauge Flammable Liquids c/w Probe for tanks up to 3m in height

Regular price $2,728.00 AUD
Sale price $2,728.00 AUD Regular price
Save $0
Sold out
Inclusive of GST. Shipping calculated at checkout.

Other payment options

The Basics

CONFIGURATION SOFTWARE


The OLE Z5020 Automatic Tank Gauge, from GO Industrial, is an accurate, yet cost effective instrument to measure and report on the level of flammable liquids within a tank.åÊ The OLE Z5020 reads a hydrostatic pressure sensor that is suspended into the tank. Accuracy is +/- 0.5%.

      Installation

      With simplicity in mind, the Z5020 system can be installed in less than 1 hour.åÊ Sensor into tank, wired to display, mounted on wall or pipe. Plug in lap top configuration. Test Alarm and scroll screen‰Û?.

      Power supply can be 24vdc, so no mains power required at fill point to power gauge system. (Multi power supply included, 12/24vdc or 100/240 vac)

      • GO Data Sheet OLE Z5020
      • GO Wiring Diagram OLE Z5020
      • GO Manual OLE Z5020 Configuration Communication Initial Set-Up
      • GO Manual OLE Z5020 Configuration Step by Step Guide
      • GO Manual OLE Z5020 Config Record Sheet
      • GO Manual OLE Z5020 Modbus Documentation V1 12 firmware 2017
      • GO Manual OLE Z5020 Strapping table guide

      Inputs / Outputs

      • Power Supply 18-24 vdc (with optional 110-240 vac power supply)
      • Input : 1 x Tank Sensor 4-20 mA (new or existing measuring sensor)
      • Input : 2 x Digital inputs, Normally Closed (H and B Alarms)
      • Output: 1 x Modbus RS485 with registers for all features
      • Output: 1 x 4-20 Output: 4-20 mA proportional to Litres Capacity.
      • Output: 4 x Level Triggers. 24vdc as std, or Volt Free Relay Option
      • Output: 1 x Bund Condition Digital condition (NC To BMS)
        • Accuracy +/- 0.25% or better.
        • Two (2) Year Warranty
        • Litres Display and % Bar and Alarm Status
        • 4-20 mA output for BMS + Modbus RTU as standard
        • Suitable for any height / shape of Tank.
        • Low Installation & Maintenance Costs
        • IP65 weatherproof enclosure
        • Alarm Test Functions Two button auto reset operation
        • Single power connection for multi-functions
        • Replaces separateåÊ Gauge, High / Low /Bund Alarms
        • Adjustable Screen Resolution
        • Adjustable Safe Fill Level Setting
        • Suitable with petrol, kerosene, diesel, biodiesel up to B100, AdBlue & antifreeze (coolant)
        • Tank probes are an electronic pressure sensor with a 1" BSPT male fitting.
        • Level probes must be suspended 50mm from the bottom of the tank.
        • 1 gauge required per tank. Slave display option available.
        • Options- Choose between bund probe or water bottom sensor
        • Relay board fits inside gauge housing, 4 volt free outputs
        pagination here
      View full details
        pagination here

      Recently Viewed Products