Franklin EVO 200 Tank Gauge c/w Probe for tanks up to 2m in height
Franklin EVO 200 Tank Gauge c/w Probe for tanks up to 2m in height
Franklin EVO200D Tank Gauge c/w Probe for tanks up to 2m in height
Skip to product information
1 of 4
Maximum tanks monitored 6 (EVO™ 200)/14 (EVO™ 400)
Maximum sensor input capacity  6 (EVO™ 200)/14 (EVO™ 400)
Lines capacity  6 (EVO™ 200)/14 (EVO™ 400)
Dry contact input channels 2
Relay output channels 2
Connectivity  Ethernet, RS-232, RS-485, standard USB, Mini-B USB, and WiFi (optional)
Display type  7" (17.78 cm) color LCD touch screen
Printer type External (network or USB)
Alarm  Internal audible alarm
LEDs  Alarm, warning, and power
Tank chart correction points  7,500
Applicable liquids  Petroleum, chemicals, and waste
Level units Inches, centimeters, and millimeters
Volume units  Gallons or liters (mass with density option)
Power requirements  110 to 240 VAC, 50/60 Hz, 2.6 Amps
Operating temperature 32° to 104° F (0° to 40° C)
Humidity  0-95% non-condensing
Dimensions  H: 8" (205 mm), W:13 ¾" (350 mm),D: 3¼" (83 mm)
Alarm set points  High/low product, water, and temperature
Technical Advantages  Inventory reconciliation/tank autocalibration/flow rate monitoring (optional)
Measurements  Density, mass, and phase separation measurement
Notifications  Email and SMS
Programming  Conditions
Monitoring  Back-up generator
Support  MODBUS™
Approvals  UL, cUL, ATEX, IECEx, GSA IT Security
Certifications
  • Third party certification of leak detection capabilities
  • Third party verified “MATURE” security posture level
    In Summary Simple - simple setup and operation Optional Web Interface - remote connectivity via the iFUEL Tank web interface Simple Interface - full-color 7” LCD touchscreen provides one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else Secure - EVO 200 keeps your site in compliance and protected from security threats with customizable user roles, user activity tracking, and up to 3-years of data back-up to protect against power outages or other system interruptions Inventory Reconciliation - an automated leak detection function that analyzes tank volume, deliveries, and sales data to detect fuel loss or gains with a high level of accuracy. Auto Calibration - eliminate discrepancies in delivery reporting and daily reconciliations caused by inaccurate tank information programmed into the EVO 200 with this advanved function that automatically generates a highly accurate tank strapping chart. Franklin Turbine Pump Interface - enhanced remote pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority Icon Based Design - designed to be understood easily and operated intuitively. It’s simple to operate for new users and can reduce the amount of training required to operate One Touch Buttons - users can customise the home screen buttons to automate and carry out anything from complex, multi-function processes to simple daily delivery report generation - all with the touch of a single button Quick Jump Menu - navigate quickly from application to application with ease. This time-saving menu makes the interface’s structure extremely shallow, simple to navigate, and reduces the amount of steps it takes to accomplish tasks Specifications Maximum tanks monitored: 6 Maximum sensor input capacity: 6 Total # of inputs: 6 Dry contact input channels: 2 Relay output channels: 2 Connectivity: Ethernet, RS-232, RS-485, standard USB, mini USB, and Wifi (optional) Display type: 7” (17.78 cm) color LCD touch screen Printer type: External (network or USB) Alarm: Internal audible alarm LEDs: Alarm, warning, and power Tank chart correction points: 7,500 Applicable liquids: Petroleum, chemicals, and waste Level units: Inches, centimeters, and millimeters Volume units: gallons or litres (mass with density option) Power requirements: 110 to 240 VAC, 50/60 hz, 1.0 Amps max. Operating temperature: 32° to 104 °F (0° to 40 °C) Humidity: 0-90% non-condensing Dimensions: Height: 8” (205mm), Width:13 ¾” (350mm), Depth: 3¼” (83mm) Capabilities High/low product, water, and temperature alarm set points Inventory reconciliation / tank autocalibration (optional) Density, mass, and phase separation measurement Email and SMS notifications Back-up generator monitoring
    pagination here

Franklin EVO 200 Tank Gauge c/w Probe for tanks up to 2m in height

SKU: EVO200D

Franklin EVO 200 Tank Gauge c/w Probe for tanks up to 2m in height

Regular price $7,111.50 AUD
Sale price $7,111.50 AUD Regular price
Save $0
Sold out
Inclusive of GST. Shipping calculated at checkout.

Other payment options

The Basics

The Franklin Refuelling EVO 200 Automatic Tank Gauge, from GO Industrial, can interface with up to 6 tanks across the wide range of sensors and probes available. This value automatic tank gauge provides turbine pump interface, inventory reconciliation, and tank auto-calibration.  Accuracy is +/- 0.1%.  

The highly-intuitive, full-colour, icon-based touch screen provides user-friendly on-site access to inventory, alarm, and compliance data.  The simple setup and operation of the EVO 200, remote connectivity via iFUEL TANK, and advanced security features protect your fuel system while keeping you directly connected to vital site data whenever, and wherever.


Customers also purchased

Maximum tanks monitored 6 (EVO™ 200)/14 (EVO™ 400)
Maximum sensor input capacity  6 (EVO™ 200)/14 (EVO™ 400)
Lines capacity  6 (EVO™ 200)/14 (EVO™ 400)
Dry contact input channels 2
Relay output channels 2
Connectivity  Ethernet, RS-232, RS-485, standard USB, Mini-B USB, and WiFi (optional)
Display type  7" (17.78 cm) color LCD touch screen
Printer type External (network or USB)
Alarm  Internal audible alarm
LEDs  Alarm, warning, and power
Tank chart correction points  7,500
Applicable liquids  Petroleum, chemicals, and waste
Level units Inches, centimeters, and millimeters
Volume units  Gallons or liters (mass with density option)
Power requirements  110 to 240 VAC, 50/60 Hz, 2.6 Amps
Operating temperature 32° to 104° F (0° to 40° C)
Humidity  0-95% non-condensing
Dimensions  H: 8" (205 mm), W:13 ¾" (350 mm),D: 3¼" (83 mm)
Alarm set points  High/low product, water, and temperature
Technical Advantages  Inventory reconciliation/tank autocalibration/flow rate monitoring (optional)
Measurements  Density, mass, and phase separation measurement
Notifications  Email and SMS
Programming  Conditions
Monitoring  Back-up generator
Support  MODBUS™
Approvals  UL, cUL, ATEX, IECEx, GSA IT Security
Certifications
  • Third party certification of leak detection capabilities
  • Third party verified “MATURE” security posture level
    In Summary Simple - simple setup and operation Optional Web Interface - remote connectivity via the iFUEL Tank web interface Simple Interface - full-color 7” LCD touchscreen provides one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else Secure - EVO 200 keeps your site in compliance and protected from security threats with customizable user roles, user activity tracking, and up to 3-years of data back-up to protect against power outages or other system interruptions Inventory Reconciliation - an automated leak detection function that analyzes tank volume, deliveries, and sales data to detect fuel loss or gains with a high level of accuracy. Auto Calibration - eliminate discrepancies in delivery reporting and daily reconciliations caused by inaccurate tank information programmed into the EVO 200 with this advanved function that automatically generates a highly accurate tank strapping chart. Franklin Turbine Pump Interface - enhanced remote pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority Icon Based Design - designed to be understood easily and operated intuitively. It’s simple to operate for new users and can reduce the amount of training required to operate One Touch Buttons - users can customise the home screen buttons to automate and carry out anything from complex, multi-function processes to simple daily delivery report generation - all with the touch of a single button Quick Jump Menu - navigate quickly from application to application with ease. This time-saving menu makes the interface’s structure extremely shallow, simple to navigate, and reduces the amount of steps it takes to accomplish tasks Specifications Maximum tanks monitored: 6 Maximum sensor input capacity: 6 Total # of inputs: 6 Dry contact input channels: 2 Relay output channels: 2 Connectivity: Ethernet, RS-232, RS-485, standard USB, mini USB, and Wifi (optional) Display type: 7” (17.78 cm) color LCD touch screen Printer type: External (network or USB) Alarm: Internal audible alarm LEDs: Alarm, warning, and power Tank chart correction points: 7,500 Applicable liquids: Petroleum, chemicals, and waste Level units: Inches, centimeters, and millimeters Volume units: gallons or litres (mass with density option) Power requirements: 110 to 240 VAC, 50/60 hz, 1.0 Amps max. Operating temperature: 32° to 104 °F (0° to 40 °C) Humidity: 0-90% non-condensing Dimensions: Height: 8” (205mm), Width:13 ¾” (350mm), Depth: 3¼” (83mm) Capabilities High/low product, water, and temperature alarm set points Inventory reconciliation / tank autocalibration (optional) Density, mass, and phase separation measurement Email and SMS notifications Back-up generator monitoring
    pagination here
View full details
    pagination here

Recently Viewed Products