GO Galvanised Steel Bush Range Scr BSP BS EN 10241

SKU: SB0806G

$5

GO Galvanised Steel Bush Range Scr BSP BS EN 10241

Bushings are hollow plugs with threads on the outside and the inside.  They allow for pipe reductions by threading the bushing into a female thread and then threading the small pipe size into the centre of the bushing.  This versatility works well in troubleshooting complex piping systems.

Specification

  • BS EN 10241 “Steel Threaded Pipe Fittings, Screwed BSP Thread”.
  • Australian Standard 1074 “Steel Tubes and Tubulars Threaded or suitable for Threading with Pipe Threads of Whitworth Form”.
  • Australian Standard 1650 “Galvanised Coatings on Ferrous Articles”.

Material

  • Tubulars: These are manufactured from tubing made in accordance with AS 1074 from steel with 0.06 max sulphur and 0.06 max phosphorus.
  • Machined Fittings: These are manufactured to dimensions in BS EN 10241:2000 and generally made from “Free Cutting Steel”.

Finish

Surface Condition

  1. Black Steel: These fittings are generally degreased and protected with a coating of light oil.
  2. Zinc Protective Coating: Fittings may be supplied zinc plated using the Electrolytic Zinc Coating process on finished Black Fittings.
  3. Hot Dip Zinc Galvanising: Galvanising of fittings shall be performed before the thread cutting operation, by means of the hot dip method.
  4. Zinc Flake: Fittings may be supplied Zinc Flake Coated. This process being performed on Finished Black Fittings.

Threads

  • Threads for the screwed ends of fittings comply to the appropriate requirements of AS 1722 Part 1: Sealing pipe threads and also ISO 7-1.
  • Female Ends: Normally supplied with parallel thread.
  • Male Ends: Normally supplied with taper threads

You may also like

Recently viewed