GO Galvanised Steel Reducing Tee Range Scr BSP BS EN 10241
SKU: ST1008G
$35
GO Galvanised Steel Reducing Tee Range Scr BSP BS EN 10241
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line.Pipe Tees are widely used as pipe fittings.
Specification
- BS EN 10241 “Steel Threaded Pipe Fittings, Screwed BSP Thread”.
- Australian Standard 1074 “Steel Tubes and Tubulars Threaded or suitable for Threading with Pipe Threads of Whitworth Form”.
- Australian Standard 1650 “Galvanised Coatings on Ferrous Articles”.
Material
- Tubulars: These are manufactured from tubing made in accordance with AS 1074 from steel with 0.06 max sulphur and 0.06 max phosphorus.
- Machined Fittings: These are manufactured to dimensions in BS EN 10241:2000 and generally made from “Free Cutting Steel”.
Finish
Surface Condition
- Black Steel: These fittings are generally degreased and protected with a coating of light oil.
- Zinc Protective Coating: Fittings may be supplied zinc plated using the Electrolytic Zinc Coating process on finished Black Fittings.
- Hot Dip Zinc Galvanising: Galvanising of fittings shall be performed before the thread cutting operation, by means of the hot dip method.
- Zinc Flake: Fittings may be supplied Zinc Flake Coated. This process being performed on Finished Black Fittings.
Threads
- Threads for the screwed ends of fittings comply to the appropriate requirements of AS 1722 Part 1: Sealing pipe threads and also ISO 7-1.
- Female Ends: Normally supplied with parallel thread.
- Male Ends: Normally supplied with taper threads.