GO Gasket Compressed Fibre Table E 1.5mm Range



GO Gasket Compressed Fibre Table E 1.5mm Range

GO Industrial supplies compressed fibre gaskets made from Aramid fibres bonded with Nitrile Rubber (NBR).  Our gaskets are manufactured by means of a hot calendar process under rigorous quality control procedures.
  • Size Range - 15mm - 300mm
  • Flange - AS2129 Table E
  • Thickness - 1.5mm
  • Gasket Style - Full Face
  • Peak Temperature - + 400 deg C
  • Constant Temperature - + 240 deg C
  • Peak Pressure - up to 11,000 kpa
  • Constant Working Pressure - 5000 kpa 
  • Application - Air, Water, Low Pressure Steam, Petroleum Derivatives, Oil, Gas and General Chemical Products

A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.

Gaskets allow for "less-than-perfect" mating surfaces on machine parts where they can fill irregularities. Gaskets are commonly produced by cutting from sheet materials.

It is usually desirable that the gasket be made from a material that is to some degree yielding such that it is able to deform and tightly fill the space it is designed for, including any slight irregularities. A few gaskets require an application of sealant directly to the gasket surface to function properly.

A flange gasket is a type of gasket made to fit between two sections of pipe that are flared to provide higher surface area.  Flange gaskets come in a variety of sizes and are categorised by their inside diameter and their outside diameter.

There are many standards in gasket for flanges of pipes. The gaskets for flanges can be divided in major 4 different categories:

  1. Sheet gaskets
  2. Corrugated metal gaskets
  3. Ring gaskets
  4. spiral wound gaskets

Sheet gaskets are simple, they are cut to size either with bolt holes or without holes for standard sizes with various thickness and material suitable to media and temperature pressure of pipeline.


You may also like