Other payment options
GO AP 1/4" to 2" PVC Body Pinch Valves
GO AP 1/4" to 2" PVC Body Pinch Valves
Overview
Air or liquid pressure at the control inlet collapses the internal rubber sleeve to provide immediate and positive shut off. The rubber sleeve closes completely even on large particles, abrasive and corrosive materials. When open it allows full, unobstructed flow with little turbulence. The sleeves can be easily replaced when they wear out. To fully close the sleeve the valve requires a signal pressure 1.3 BAR (20 psi) greater than the media pressure.
Specifications
| Model | Port Size A (BSP) | Bore ID | Body Material | Sleeve Material (standard) | Media Max Pressure BAR | Control Max Pressure BAR | Pilot Inlet Size |
|---|---|---|---|---|---|---|---|
| AP-6331 | 1/4" | 1/4" | Nylon | NBR | 3.4 | 5.5 | 1/8” |
| AP-6291 | 3/8” | 3/8” | Nylon | NBR | 4 | 6 | 1/8” |
| AP-6222 | 3/4" | 5/8” | Nylon | NBR | 4 | 6 | 1/4" |
| AP-6206 | 1 ¼” | 1 ¼” | Nylon | NBR | 4 | 6 | 1/4" |
| AP-6603 | 2” | 2” | Polyprop | NBR | 3.4 | 4.7 | 3/8” |
Recently Viewed Products
Join 190+ Happy GOers
Over 16,000 Orders Shipped
An absolutely impeccable process, from ordering, to the super fast delivery, the the top quality of the product.
"Mirka is everything they say it is. Saved me so much time hand sanding. The service was great and the parcels arrived so quick."
Bob Ware joined the Dust-Free Sanding Revolution
55+ GO Staff & Growing, Australia-wide.
One of the nicest and friendliest companies I have had the pleasure to deal with. Customer service is pretty slack in companies now but, you guys exemplify what good old customer service used to be - THANK YOU!!!!
The service from the staff was above expectations. The setup and use videos were a great asset also and sealed the deal for me.
Keep up the great work GO Industrial.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
