GRACO G-Force II Pressure Washer Tips

From $17.20 AUD

$17.80

Sold out

Product : 805634 Chemical Injector Tip

Product variants

Details

Pressure Washer Tip Sizing

Selecting the correct power washer tip is crucial. If a user selects a washer size that is too small, water can backfire back into the washer pump, which can cause severe damage to the washer. If a user selects a washer tip that is too large, the cleaning ability of the washer is reduced. To help home owners and contractors select the correct pressure washer tip size, we have developed our

0 Degree - Red Tip

Called the cutting nozzle, Good for eliminating stubborn stains and dirt from concrete. Will cut into the surface the most, commonly used on cement.

15 Degree - Yellow Tip

Known as the chiseling nozzle, Can strip paint, grease, and grime from hard surfaces, as well as dirt and debris from sidewalks.

25 Degree - Green Tip

Most commonly used for flushing dirt from sidewalks, metal furniture, and other surfaces, as well as sweeping wet leaves.

40 Degree - White Tip

Used for cleaning a large area fast. Usually good for cleaning surfaces such as aluminium siding and vehicles.

Chemical Injector Tip

The chemical injector tip, also known as the soap nozzle, is the pressure washer nozzle that is used when applying any form of chemical onto the surface that runs through your washer. This nozzle has a slightly larger orifice than normal washer tips, which decreases the pressure in the pump. This decrease in pressure allows for the chemical injector to kick in, drawing the cleaning solution into the pump from the container.

When using chemicals inside your washer, remember to use only those cleaners that are developed through pressure washer manufacturers. One common mistake has been the increased use of bleach as a pressure washer detergent. Doing this will cause internal damage to the pump, and will result in hefty repair bills.

Rotary Tip

Pressure washer rotary nozzles act as a zero degree tip that sprays in a circualar motion. The spray pattern usually covers an area anywhere from 3-8 inches depending on how far the lance is from the surface. Rotary nozzles are great for use on stubborn stains, wall cleaning, paint stripping, and more.

There are also two different types of Turbo Nozzles: Regular style and spring loaded. If a rotary nozzle is spring loaded, it means that you can point the washer tip in any direction (for example, the ceiling or side of the house). A regular turbo nozzle must be pointed directly downward, and will not spin if pointed horizontal to spray a wall, or upside down.

Product Range

805xxx 00 Degree Red Tip
805xxx 15 Degree Yellow Tip
805xxx 25 Degree Green Tip
805xxx 40 Degree White Tip
244768 Set of 4 Tips (0, 15, 25, 40) for 2532 & 3027
800708 Set of 4 Tips (0, 15, 25, 40) for 3032 & 4040
Available orifice sizes - 3, 3.5, 4, 4.5, 5, 5.5
805634 Chemical Injector Tip
198012 Rotating Tip, 4000 psi
198014 Rotating Tip, 5000 psi
198013 Oscillating Tip, 5000 psi

Features

Selecting the correct pressure washer tip is one of the most integral things that a user must consider when cleaning.

There are 4 main tip sizes, with each one being used for different surfaces and materials.

There are also rotary nozzles and chemical injectors that each serve their own separate purpose.

The information below is designed to help you make an informed decision and maximise your washers cleaning ability.

Graco G-Force II Pressure Washer Tips

Overview

Low pressure nozzle for use with detergent injector. Ideal for applying detergent, misting and rinsing.

Chemical Injector Tip
- Low pressure nozzle for use with detergent injector

Our network of warehouses Australia-wide enables us to
deliver anywhere in Australia except to PO Boxes. We aim to ship your order within 1-3 days upon receipt of payment, as long as the item is readily available.

All returns must be pre-approved to ensure replacement and / or refund.

Read our complete warranty terms & conditions here.

All our online payment methods are secured.

GO Data Sheet Graco Pressure Washer Accessories

Specifications

ORIFICE DIAMETER (IN)	0.15
MAXIMUM WORKING PRESSURE (KPA)	27600
MAXIMUM WORKING PRESSURE (PSI)	4000
MAXIMUM WORKING PRESSURE (BAR)	276
FOR USE WITH	AquaMax, AquaMax, AquaMax, AquaMax, AquaMax, G-Force, G-Force, G-Force, G-Force, G-Force, G-Force II, G-Force II, G-Force II, G-Force II, G-Force II, Hydra-Clean, Hydra-Clean, Hydra-Clean, Hydra-Clean, Hydra-Clean
TYPE	Pressure Washer Sprayer Tip
MODEL	G-Force II
SERIES	Washer Spray Tip
COLOR	Black
CONNECTION SIZE (IN)	0.25
CONNECTION TYPE	Quick Disconnect
MATERIAL	Brass
NOMINAL SIZE	6540

Features

Selecting the correct pressure washer tip is one of the most integral things that a user must consider when cleaning.
There are 4 main tip sizes, with each one being used for different surfaces and materials.
There are also rotary nozzles and chemical injectors that each serve their own separate purpose.
The information below is designed to help you make an informed decision and maximise your washers cleaning ability.