GRACO Mortar Pump ToughTek M680A 262927 with Hose Kit
GRACO Mortar Pump ToughTek M680A 262927 Side View
GRACO Mortar Pump ToughTek M680A 262927
Accessory 24W889 Large Capacity Hopper
GRACO Mortar Pump ToughTek M680A 262927 Hose Kit
HTX 680 Applicator - GRACO Mortar Pump ToughTek M680A 262927
Pole Applicator - GRACO Mortar Pump ToughTek M680A 262927
Flex Hose Applicator - GRACO Mortar Pump ToughTek M680A 262927
Skip to product information
1 of 9

Part Number 262927 Package:

  • M680 Cart Unit
  • 18m hose kit (60ft)
  • 24U209 HTX 680 and 24T947 Flex Hose applicator
  • Stainless Steel hopper
  • Spare hard rubber retaining cap
  • Extra #3, 4, 8 & 9 size nozzles for Flex Hose/Pole Applicator

Part Number 24T834 Package:

  • M680 Cart Unit
  • 10.7m hose kit (35ft)
  • 24T947 Flex Hose applicator
  • 38 litre Stainless Steel hopper with 2" NPT cam/groove fittings and mounting bracket
  • GO Data Sheet Graco Toughtek M680 Case Study
  • GRACO ToughTek Hopper M680a Complete Piston Pump 262927 Data Sheet 349013EN-C
  • GO Manual Graco Toughtek M680 Pump Lower
  • GO Manual Graco Toughtek M680a 1
  • GO Catalogue Graco ToughTek Hopper M680a Complete Piston Pump 3J0395EN-A
APPLICATION Industrial
COMPATIBLE MATERIAL Cementitious Material
FLUID INLET SIZE (CM) 5.08
FLUID INLET SIZE (IN) 2
FLUID INLET SIZE (MM) 50.8
FLUID INLET THREAD GENDER Male
FLUID OUTLET SIZE (CM) 2.54
FLUID OUTLET SIZE (IN) 1
FLUID OUTLET SIZE (MM) 25.4
FLUID OUTLET THREAD GENDER Female
FLUID OUTLET THREAD TYPE NPT
MATERIAL Stainless Steel
MAXIMUM OPERATING TEMPERATURE (°C) 49
MAXIMUM OPERATING TEMPERATURE (°F) 120
MAXIMUM WORKING PRESSURE (BAR) 70
MAXIMUM WORKING PRESSURE (KPA) 7000
MAXIMUM WORKING PRESSURE (PSI) 1000
MOTOR TYPE Pneumatic
SERIES M680a
MAXIMUM FLOW RATE (GPM @ 60 CPM) 10.88
AIR INLET SIZE (IN) 3/4
AIR INLET THREAD GENDER Female
AIR INLET THREAD TYPE Chicago Fitting
FLUID INLET TYPE Cam Groove
MAXIMUM AIR WORKING PRESSURE (PSI) 100
MAXIMUM FLOW RATE (LB/MIN @ 60 CPM) 41.2
TYPE Pneumatic Piston Pump Package
MAXIMUM WORKING PRESSURE (MPA) 7

    Primary features

    • Low pressure pumping (200 to 500 psi/13.7 to 34.5 bar) reduces wear on pump lower
    • Less material waste and more consistent finish than hand-trowling
    • Fast, easy cleaning with high velocity flush
    • Can be quickly disassembled for hand cleaning
    • Explosion-proof for hazardous spray areas
    • One convenient air source to run pump and atomize air

    Flex Hose Applicator

    • Best for heavily filled materials that easily pack out
    • Includes Round Nozzle; provides a rough finish texture
    • Simple design, easy to clean
    • Order part number 24T947

    Pole Applicator

    • For hard to reach areas
    • Best for heavily filled materials that easily pack out
    • Includes Round Nozzle; provides a rough finish texture
    • Simple design, easy to clean
    • Order part number 24T946

    HTX 680 Applicator

    • Good for lighter materials that do not typically pack out
    • Includes Round Pattern Nozzles; provides a medium round pattern texture finish
    • Air mixed into fluid through multiple venturi ports provides a consistent pattern
    • Gives a more controlled pattern for lightweight materials or high solids coatings
    • Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
    • Order part number 24U209

    Large Capacity Hopper

    • 25 gal (95 L) hopper kit
    • Ideal for materials that require more than 10 gal/38 liter capacity, such as fireproofing
    • Boost productivity by minimizing refills
    • Easily connects to ToughTek M680a
    • Easy to connect and maneuver
    • Order part number 24W889

Graco ToughTek Hopper M680a Complete Piston Pump Range

SKU: 262927

Graco ToughTek Hopper M680a Complete Piston Pump Range

Regular price $25,862.00 AUD
Sale price $25,862.00 AUD Regular price $18,150.00 AUD
Save $0
Sold out
Inclusive of GST. Shipping calculated at checkout.
Option

Other payment options

The Basics

The ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials, and tackles difficult polymers with fillers such as glass flake, silica or sand. The all stainless design makes cleanup of epoxy mortars easy and worry-free.

Portable sprayer for mortar, cementitious and heavily filled materials.

Includes:

  • Pump
  • Motor
  • Controls on cart
  • Gaskets for cam and groove connectors
  • Pilot tube repair fitting
  • Pump ratchet tool
  • Soft seal pump kit
  • Part number 262927 includes a complete pump repair kit instead of soft seal kit.



    Part Number 262927 Package:

    • M680 Cart Unit
    • 18m hose kit (60ft)
    • 24U209 HTX 680 and 24T947 Flex Hose applicator
    • Stainless Steel hopper
    • Spare hard rubber retaining cap
    • Extra #3, 4, 8 & 9 size nozzles for Flex Hose/Pole Applicator

    Part Number 24T834 Package:

    • M680 Cart Unit
    • 10.7m hose kit (35ft)
    • 24T947 Flex Hose applicator
    • 38 litre Stainless Steel hopper with 2" NPT cam/groove fittings and mounting bracket
    • GO Data Sheet Graco Toughtek M680 Case Study
    • GRACO ToughTek Hopper M680a Complete Piston Pump 262927 Data Sheet 349013EN-C
    • GO Manual Graco Toughtek M680 Pump Lower
    • GO Manual Graco Toughtek M680a 1
    • GO Catalogue Graco ToughTek Hopper M680a Complete Piston Pump 3J0395EN-A
    APPLICATION Industrial
    COMPATIBLE MATERIAL Cementitious Material
    FLUID INLET SIZE (CM) 5.08
    FLUID INLET SIZE (IN) 2
    FLUID INLET SIZE (MM) 50.8
    FLUID INLET THREAD GENDER Male
    FLUID OUTLET SIZE (CM) 2.54
    FLUID OUTLET SIZE (IN) 1
    FLUID OUTLET SIZE (MM) 25.4
    FLUID OUTLET THREAD GENDER Female
    FLUID OUTLET THREAD TYPE NPT
    MATERIAL Stainless Steel
    MAXIMUM OPERATING TEMPERATURE (°C) 49
    MAXIMUM OPERATING TEMPERATURE (°F) 120
    MAXIMUM WORKING PRESSURE (BAR) 70
    MAXIMUM WORKING PRESSURE (KPA) 7000
    MAXIMUM WORKING PRESSURE (PSI) 1000
    MOTOR TYPE Pneumatic
    SERIES M680a
    MAXIMUM FLOW RATE (GPM @ 60 CPM) 10.88
    AIR INLET SIZE (IN) 3/4
    AIR INLET THREAD GENDER Female
    AIR INLET THREAD TYPE Chicago Fitting
    FLUID INLET TYPE Cam Groove
    MAXIMUM AIR WORKING PRESSURE (PSI) 100
    MAXIMUM FLOW RATE (LB/MIN @ 60 CPM) 41.2
    TYPE Pneumatic Piston Pump Package
    MAXIMUM WORKING PRESSURE (MPA) 7

      Primary features

      • Low pressure pumping (200 to 500 psi/13.7 to 34.5 bar) reduces wear on pump lower
      • Less material waste and more consistent finish than hand-trowling
      • Fast, easy cleaning with high velocity flush
      • Can be quickly disassembled for hand cleaning
      • Explosion-proof for hazardous spray areas
      • One convenient air source to run pump and atomize air

      Flex Hose Applicator

      • Best for heavily filled materials that easily pack out
      • Includes Round Nozzle; provides a rough finish texture
      • Simple design, easy to clean
      • Order part number 24T947

      Pole Applicator

      • For hard to reach areas
      • Best for heavily filled materials that easily pack out
      • Includes Round Nozzle; provides a rough finish texture
      • Simple design, easy to clean
      • Order part number 24T946

      HTX 680 Applicator

      • Good for lighter materials that do not typically pack out
      • Includes Round Pattern Nozzles; provides a medium round pattern texture finish
      • Air mixed into fluid through multiple venturi ports provides a consistent pattern
      • Gives a more controlled pattern for lightweight materials or high solids coatings
      • Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
      • Order part number 24U209

      Large Capacity Hopper

      • 25 gal (95 L) hopper kit
      • Ideal for materials that require more than 10 gal/38 liter capacity, such as fireproofing
      • Boost productivity by minimizing refills
      • Easily connects to ToughTek M680a
      • Easy to connect and maneuver
      • Order part number 24W889
    View full details
      pagination here

    Recently Viewed Products