Graco Spray Guns & Gun Spares.

An airless spray gun, or handpiece, is the part of a paint sprayer you hold. The pump sends paint down the hose at high pressure and the handpiece releases it through the spray tip when you pull the trigger. These are genuine Graco handpieces and the spares that keep them spraying.

The Graco Contractor PC is the everyday handpiece. It has a mechanical trigger with up to 50% lighter pull, an E-Z Fit trigger you can set for 2, 3 or 4 fingers and a ProConnect cartridge you can swap on site. We also carry the Contractor, FTx, Silver Plus, Flex Plus and SG3 handpieces, the G40 air assisted gun and the Ultra QuickShot replacement gun. If you need the whole machine, browse our paint sprayers.

The Graco Contractor PowerShot works differently: the trigger is electric. A DeWalt 20V battery drives it, so the gun opens 80 times faster than a traditional gun with 80% less force on each pull, which Graco says virtually eliminates tip spits. The PowerShot Standard works with any airless sprayer. The PowerShot XT also lets you change spray pressure from the handpiece, up to 61 metres from the sprayer, but it only connects to Graco Ultra XT and Mark XT ProContractor sprayers or an XT sprayer fitted with the Smart Display XT. Both use their own PowerShot ProConnect cartridge, not the Contractor PC one. In short: Contractor PC for most painters, PowerShot Standard for all day spraying on any sprayer, PowerShot XT if you run an XT sprayer.

Most handpieces ship with a Graco RAC X SwitchTip and tip guard, and some come as kits with a hose and whip hose. The tip sets how wide the fan is and how much paint flows, so read our airless spray tips guide before you change one.

For fine finishing there are EDGE II HVLP, Finex and AirPro air spray guns. Repair kits cover the Contractor PC cartridge and trigger, Contractor and FTx guns plus SG2 and SG3 guns, with more in our airless sprayer spare parts. Rather we fix it? See spray gun servicing.

Quick list: Graco Spray Guns & Gun Spares , page 1 of 6

137 products
FAQs

Common questions answered.

The questions we hear most often about this range. Full knowledge base on our FAQ page.

  • Contractor PC versus Contractor versus FTx?

    Contractor PC is the current production gun on Ultra PC sprayers, with a ProConnect quick-change cartridge for fast in-field service. Contractor (older) is the predecessor without ProConnect; still in service on older Ultra and Magnum units. FTx is an alternate Graco gun line on selected Magnum and entry units. Match the gun to the unit serial. The Contractor and FTx Repair Kit (288488) covers both older Contractor and FTx top-end rebuilds.

  • How does ProConnect cartridge swap work?

    Contractor PC carries a removable cartridge that holds the gun fluid path. Worn cartridge is unscrewed, new ProConnect Replacement Cartridge (17Y297) is screwed in, gun is back in service. Saves the time of full gun teardown and rebuild for cartridge-side wear. Trigger-side wear is covered by the Contractor PC Trigger Repair Kit (17Y466) separately. ProConnect on the gun pairs with the ProConnect quick-change pump on the Ultra PC unit, so you can service both pump and gun in the field.

  • When do I rebuild versus replace the gun?

    Rebuild when the gun body and trigger frame are still in good condition and the wear is in the cartridge / packings / needle / seat (typical for daily-use guns at scheduled service). Replace when the gun body or trigger frame is damaged from drop or chemical attack, when the rebuild cost approaches replacement cost, or when the gun model has been superseded and parts are no longer stocked. Talk to GO with the gun model and serial.

  • Fusion ProConnect: what is in the system?

    Fusion ProConnect is the Graco at-the-gun plural-component mixing system on the LineLazer V 200MMA cold applied plastic unit. ProConnect Cartridge in 1-pack (19Y300) and 5-pack (19Y308) is the standard consumable. MMA Cartridge (25V433), Mix Chamber (25T481), Flat Mix Chamber PC20FL (with 0.020 in / 0.51 mm orifice) and Orifice PC22WD cover the unit-side wear parts. Fusion AP MMA Retrofit Kit (26D973), Fusion PC MMA Gun (25U857) and MMA Air-Purge LineLazer Gun (25E471) cover the gun-side upgrades.

  • Are spare parts genuine Graco?

    Yes. Contractor PC ProConnect Replacement Cartridge (17Y297), Trigger Repair Kit (17Y466), Contractor and FTx Repair Kit (288488), Fusion ProConnect Cartridges (19Y300, 19Y308, 25V433, 25T481, PC20FL, PC22WD) and the wider gun-spare range are genuine Graco parts and carry the standard Graco parts warranty.

Full guide

Choosing the Right Spray Gun or Gun Spare

Graco airless and HVLP spray guns for the Magnum, Ultra, Ultra Max II, FinishPro, industrial King and Merkur sprayer ranges. Contractor PC, Contractor, FTx, Silver Plus airless guns, AirPro HVLP for the Triton SST range, Pro Xp85 for electrostatic, and matched repair kits across the gun line.

Contractor PC: the current daily-contractor airless gun. Graco Contractor PC Airless Spray Gun is the production manual gun on the Ultra PC sprayer range. ProConnect Replacement Cartridge (17Y297) for fast cartridge swap. Contractor PC Trigger Repair Kit (17Y466) for trigger rebuild. Saves time on in-field repair vs full gun teardown. Contractor and FTx Airless Spray Gun Repair Kit (288488) is the standard top-end rebuild for the older Contractor and FTx airless guns: needle, packings, gasket and diffuser/seat for a full top-end rebuild.

Silver Plus and Flex Plus: paint unit manual guns. Graco Silver Plus Spray Gun Kit (287041) is a manual airless gun shipped as a complete kit (gun plus 6.4 mm x 15 m hose rated to 227 bar, RAC X 517 HandTite guard, 0.9 m whip hose). Flex Plus Airless Spray Gun (248157) is the RAC X LineLazer fitment, shipped as a kit (287095) with the same hose set on the Flex Plus trigger geometry.

Fusion ProConnect for cold applied plastic (CAP/MMA). Fusion ProConnect Gun is the plural-component cold applied plastic gun for the LineLazer V 200MMA unit. ProConnect Cartridge (19Y300 1-pack, 19Y308 5-pack), MMA Cartridge (25V433), Mix Chamber (25T481), Flat Mix Chamber PC20FL (with 0.020 in / 0.51 mm orifice), Orifice PC22WD. Fusion AP MMA Retrofit Kit (26D973), Fusion PC MMA Gun (25U857), MMA Air-Purge LineLazer Gun (25E471).

AirPro HVLP for Triton SST. Graco AirPro HVLP gun (waterborne and wood-finish variants) is the matched Triton SST pressure-pot HVLP applicator. Triton SST Spray Package, AirPro HVLP Waterborne Gun, AirPro HVLP for Wood. Conventional spray finish work on cabinet, joinery and woodwork sites.

Repair kits and accessory guns. Graco Gun Contractor Repair Kit (287031) on older Contractor and Silver Plus guns. Hydra-Spray Gun Repair Kit (214968) for older Hydra-Spray guns. LineLazer Dual Spray Kit (287626) converts single-gun unit to dual-gun. HD Texture Gun Hose Kit (241338) for texture-coating work on appropriate unit. Match the repair kit and accessory gun to the unit serial before ordering.

Related categories

Can't find what you need?

Reach out to the team today and we can help you find the right gear. You'll get someone who knows the equipment, Monday to Friday, 8am to 4.30pm Brisbane time.

Chat with us Email us