Texture & Plaster Sprayers.

Perform flawless finishes with our Texture & Plaster Sprayers collection. Achieve that intricate orange peel texture with consistent precision, this range is engineered to deliver professional-grade results. Featuring industry-leading texture sprayers manufactured by Graco, these tools maximise efficiency, minimise downtime, and ensure supreme consistency. Whether you're renovating interiors, spraying drywall or tackling large-scale construction, this collection is your comprehensive ally for integrated, high-quality outcomes.

FAQs

Common questions answered.

The questions we hear most often about this range. Full knowledge base on our FAQ page.

  • Mark V XT or Mark X HD: which texture sprayer?

    Mark V XT covers Level 5 plaster finish, roof restoration membrane and acrylic textures up to roughly 4.5 LPM through a 3 in 8 inch hose with a texture gun included. Mark V HD 3-in-1 (17E663 ProContractor, 17E629 IronMan) covers roof restoration + texture + heavy coatings. Mark X HD ProContractor and Standard Series cover the high-volume daily commercial texture / plaster tier

  • What is the 3-in-1 capability?

    Mark V HD and Mark X HD '3-in-1' unit cover three application classes from one unit: texture spray, paint spray, and high-build coating. Same unit, different gun and tip setup per application. Saves the cost of separate dedicated unit on contractors who do all three. The Mark V texture gun has 4x more flow area than the standard airless gun for viscous material.

  • Mark V pump inlet advantage over 1095 PC?

    Mark V (XT and HD variants) has the pump inlet at the BOTTOM of the suction hose. The 1095 PC has the pump inlet mounted higher. Net effect: Mark V achieves a drastically increased flow rate for viscous materials because the pump is pulling material from a lower head than 1095 PC. The 1095 PC is optimised for large volumes of water-based paint where flow rate is high but viscosity is low - the inlet-higher design works fine there. For viscous Level 5 plaster, roof membrane and acrylic texture, Mark V is the right call. For very viscous materials use 1/2 inch x 15 m hose out of the manifold and step down to 3/8 inch x 15 m for the second length with a joining nipple.

  • Sand or stone: which Mark?

    Neither. Mark V XT and Mark X HD are designed for non-aggregate viscous materials. Sand and stone aggregate cannot go through a standard airless tip. For sand and stone aggregate, the Graco ToughTek M680a (262927) is purpose-built - it's a hopper piston pump for high-viscosity mortar mixed with sand (2-part epoxy mortars and similar). For cementitious materials, ToughTek F340e (Xypex Concentrate confirmed). For acrylic textures without aggregate, RTX5500PX is the right call.

  • Do you supply texture nozzles and spare parts?

    Yes. See the Texture Spare Parts collection for the Mark family pump repair kits, prime valves, carbide seat kits (for abrasive-material unit use - extends service interval significantly on Mark V and Mark X HD running texture / plaster), pump housing washers and standard wear parts. RTX5500PX nozzle set (3, 4, 6, 8, 10, 12 mm + WideTex 4 mm) ships with the unit. Order the matched repair kit on first delivery so the unit is not down on a leaking pump during a commercial texture spray.

Full guide

Choosing the Right Texture or Plaster Sprayer

Graco TexSpray Mark V, Mark V XT, Mark X HD electric airless texture sprayers for texture, plaster, drywall mud and Level 5 finish work. The Mark family is the industry-standard unit for texture / plaster / drywall on commercial and residential construction.

Mark V XT HD 3-in-1: Level 5 plaster, roof restoration. Graco Mark V XT HD 3-in-1 (Hi-Boy Standard and ProContractor variants) is the Level 5 plaster finish unit. Oversized pump inlet at the bottom of the suction hose (drastically increased flow rate for viscous materials vs the 1095 PC inlet-higher design), 3/8 inch hose standard, texture gun included (4x more flow area than standard airless gun). The OG Mark V has been discontinued; Mark V XT is the current model with a lighter, more powerful motor. Vortex pump fitted, packings around 6 times longer than standard piston-pump.

Mark V HD 3-in-1: roof restoration + texture. Graco Mark V HD 3-in-1 (ProContractor Series 17E663, IronMan Series 17E629) covers roof restoration membrane + texture + heavy coatings in one unit. Same unit class as Mark V XT but with different feature sets per series.

Mark X HD 3-in-1. Graco Mark X HD 3-in-1 (ProContractor and Standard Series variants) is the high-capacity sibling for high-volume daily texture / plaster work.

Sand and stone: NOT Mark V. Mark V XT and Mark X HD are designed for non-aggregate viscous materials (Level 5 plaster, roof restoration membrane, acrylic textures up to roughly 4.5 LPM). Sand and stone aggregate requires the Graco ToughTek range (F340e for cementitious, M680a for high-viscosity mortar with sand). Standing rule from Graco technical: you cannot spray any product with sand or stone aggregate through a standard airless tip.

RTX5500PX for acrylic textures (no aggregate). Graco RTX5500PX (in this collection) is purpose-built for acrylic textures - cork render, small-medium aggregate, smooth membranes. Kit includes 1/4 inch x 25 ft material hose, 3/8 inch x 25 ft air hose, Heavy Duty Texture Gun, nozzle set (3, 4, 6, 8, 10, 12 mm round + WideTex Adapter with 4 mm). Cannot handle sand or stone products. For sand/stone, ToughTek M680a.

Related categories

Can't find what you need?

Reach out to the team today and we can help you find the right gear. You'll get someone who knows the equipment, Monday to Friday, 8am to 4.30pm Brisbane time.

Chat with us Email us