Built for the work it does.

Graco’s high performing electrostatic spray guns keep getting better. With more models to choose from, you’ll get the performance you expect – now with greater spraying flexibility for ever-changing production needs. The new Pro Xp air spray models are designed to support your application needs. They come ready to spray out-of-the-box – without modifications.

Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist gun on the market – delivering a consistent, high quality finish every time you spray
Our improved tip line delivers a high quality finish for a variety of applications.
Plus, the pre-orifice tips atomise paints for fine finish applications.
Graco Pro Xp60 AA gun line includes Standard, Smart and Waterborne models

Features

High quality spray performance with a one-piece aircap and variety of spray tips

Transfer efficiency is improved over conventional air-assist guns

Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier

Made in the USA

The smallest profile gun with internal power supply on the market – 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter

Fan adjust pattern control reduces overspray by changing the fan pattern width according to the size of the part – improving quality and saving you money

Rugged, dependable design supported by a three year warranty

Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

Specifications

Graco Pro Xp60

Maximum Working Fluid Pressure	0.7 MPa, 7.0 bar
Maximum Working Air Pressure	0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet	0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature	48°C
Paint Resistivity Range	3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
Air Inlet Fitting	1/4 npsm(m) left-hand thread
Fluid Inlet Fitting	3/8 npsm(m)
Output Voltage	Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
Maximum Current Draw	125 microamperes
Sound Power (measured per ISO Standard 9216)	at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)	at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Wetted Parts	PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene

Graco Pro Xp60 AA

Maximum Working Fluid Pressure	21 MPa, 210 bar
Maximum Working Air Pressure	0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet	0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature	48°C
Paint Resistivity Range	3 megohm/cm to infinity
Air Inlet Fitting	1/4 npsm(m) left-hand thread
Fluid Inlet Fitting	1/4–18 npsm(m)
Output Voltage	Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
Maximum Current Draw	125 microamperes
Sound Power (measured per ISO Standard 9216)	at 0.28 MPa, 2.8 bar: 88.9 dB(A) at 0.7 MPa, 7.0 bar: 99.7 dB(A)
Sound Pressure (measured 1 m from gun)	at 0.28 MPa, 2.8 bar: 86.0 dB(A) at 0.7 MPa, 7.0 bar: 95.0 dB(A)
Wetted Parts	PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene