Pro Series.

Swap out your pump. Step up your performance.

Revolutionise your workday with the Pro Series sprayers. They’re equipped with the breakthrough technology of the ProXChange Pump or the Triax Pump which allows you to replace your pump on the job faster and easier without any tools, eliminating downtime and keeping you spraying. Get your midsize-to-large jobs done faster, smarter and move on to the next project.

FAQs

Common questions answered.

Five of the questions we hear most often on carpark and street linemarking gear. Full knowledge base on our FAQ page.

  • Pro Series vs Magnum vs Ultra vs Mark?

    Pro Series is a curated cross-cut spanning the upper Magnum tier (ProX17, ProX19), the Ultra handheld pair (cordless + 230V AC corded), and the AirAssisted Airless FinishPro GX 19. Magnum is residential/light-commercial. Mark V XT, Mark VII, Mark X are the heavier commercial unit above Magnum - higher tip orifice support, higher production volume. Pro Series is for the contractor working at the upper-residential/light-commercial boundary; Mark line is for commercial volume above that.

  • ProX17 or ProX19?

    ProX19 supports a slightly larger maximum tip orifice (about 0.021 inch vs 0.019 inch on ProX17) and steps up the pump-to-flow rating. ProX17 covers most residential and light-commercial work; ProX19 is the right pick when the painter is consistently working with heavier coatings or larger tip sizes that bench the ProX17. Both run RAC X tips, both take BlueMax II hose, both rate for daily contractor use.

  • Ultra Handheld cordless or 230V corded?

    Cordless (17N221) uses DeWalt 20V MAX batteries - the right pick for site work without mains access (renovation, exterior trim, multi-room residential where the painter is moving through the building). Corded 230V AC is the right pick where mains is always available and the painter doesn't want battery swap-out time. Both use the FlexLiner paint bag system to simplify cup cleaning between paint changes.

  • Is FinishPro GX 19 worth it over pure airless?

    If the work is cabinet, furniture, premium millwork or any finish-critical work where the painter wants HVLP-level finish quality at airless-level production speed - yes. FinishPro GX 19 is AirAssisted Airless - airless flow with an air-assist atomisation overlay. Finer finish than pure airless, faster than pure HVLP. For pure-spec HVLP work the stand-alone G40/G15 unit is the right pick.

  • Where do I find spares for these units?

    Spares for Magnum ProX17 / ProX19 are in the Magnum Airless Sprayers and Sprayer Accessories & Parts collections (inlet strainer, inlet/outlet valve repair kits, RAC X SwitchTips). Spares for Ultra Cordless / Corded handheld are in the Handheld Airless Sprayers, Spray Tips & Guards and Sprayer Cleaning & Maintenance collections (FlexLiner cup, RAC X tips, Pump Armor). Send unit serial to GO for matched spares pull.

Full guide

Pro Series Paint Sprayers

Pro Series legacy collection - the GO Industrial-pinned cross-cut of professional Graco airless sprayers for the contractor end of the residential range. Five units cover the mid-tier electric airless lineup: Magnum ProX17 (17H203), Magnum ProX19 (17H210), Ultra Cordless Handheld (17N221), Ultra Corded 230V AC Handheld and FinishPro GX 19 (17H223).

ProX17 + ProX19 are the upper end of the Magnum range - heavier-duty than the X5/X7 with a slightly larger pump, supporting tip range up to about 0.019 inch (ProX17) and 0.021 inch (ProX19). Suit serious DIY through small-contractor weekday work where the Magnum tier is the right cost point.

Ultra Cordless Handheld (17N221) and Ultra Corded 230V AC Handheld are the FlexLiner-system handheld airless sprayers - cabinet finishing, trim, doors, furniture and any application where a wheeled unit is overkill. Cordless variant uses DeWalt 20V MAX battery; corded variant uses mains power.

FinishPro GX 19 (17H223) is the AirAssisted Airless (AAA) unit - airless flow with an air-assist atomisation overlay for finer-finish work than pure airless. Cabinet shops, furniture finishing, premium millwork and any work where the painter wants HVLP-level finish quality at airless-level production speed.

Related categories

Not sure which one's right?

Tell us the carpark size, how often you'll use it, and whether you need battery or petrol. We'll come back with a shortlist and a trade quote within the day.

Chat with us Email us