Waste Oil Solutions.

Used engine oil is controlled waste under AU EPA. Cannot be dumped into stormwater + sewer. Must be collected, stored in compliant container and disposed via licensed waste oil collector (Mainstream, Cleanaway, JJ Richards). Penalties for non-compliance are substantial.

60 L for car workshop (4-5 L per oil change, 10-15 cars/day). 90-120 L for truck workshop. Bigger storage 200-1,000 L for high-volume + licensed pump-out service.

Most workshops dispose every 1-3 months depending on volume. Higher-volume sites schedule weekly + monthly pump-out via licensed collector. Check container level weekly + book collection before full.

Here's the effective thing about professional waste oil solutions – they'll actually save you heaps of money while keeping your workshop running like clockwork. Sure, there's an upfront investment, but the long-term benefits are massive, especially when you factor in Australia's strict environmental regulations and rising disposal costs.

Think about it this way: proper equipment like an oil transfer pump or oil diaphragm pump eliminates costly spills and contamination cleanup. A quality oil drum pump prevents waste and ensures you're extracting every drop efficiently. When you add an oil meter to track volumes accurately, you're only paying for actual disposal amounts – no more guesswork.

But here's where it gets really new – a self-bunded tank is your comprehensive money-saving hero. These substantial systems eliminate the need for expensive concrete bunding while providing superior spill containment. You'll slash your insurance premiums, avoid hefty EPA fines, and dramatically reduce cleanup costs. Plus, with integrated oil dispensers, you can even reuse suitable waste oil for less critical applications.

Flow rate (L/min) determines transfer speed; pressure (bar or PSI) determines the ability to push fluid through pipework, filters and elevation changes. For workshop oil dispensing, 5-15 L/min at 3-5 bar is typical. For bulk fuel transfer, 40-120 L/min at 2-4 bar is standard. For grease distribution, 0.5-2 L/min at 200-400 bar is required due to grease viscosity. Always size the pump for the worst-case scenario: longest hose run, coldest operating temperature and highest-viscosity fluid the system will handle.