Donaldson Tank Breather TRAP LED 1
GO Donaldson TRAP Breathers how they work
Donaldson TRAP v Desiccant Breathers
  • Donaldson Tank Breather TRAP LED 1" P564669
  • GO Donaldson TRAP Breathers how they work
  • Donaldson TRAP v Desiccant Breathers
1 4

Electronic Indicator

Actuated by pressure differential, flashes red to indicate change out is needed. Indicator setting, 1 psid (6.9kPa). Indicator power source: 3V lithium battery CR2032.

  • GO Data Sheet Donaldson P564669
  • GO Data Sheet Donaldson TRAP Breather Range

Moisture Meets It's Match

Donaldson T.R.A.P.™ breathers collect and expel moisture out of tanks and reservoirs. This means you won’t need to change the breather due to water saturation, unlike desiccant filters which require frequent change-out.

Donaldson TRAP water and particulate before it gets in without restricting air flow − letting your reservoirs breathe easy.

How It Works

T.R.A.P.™ breathers from Donaldson are the only breathers on the market that literally strip moisture vapour from intake air and expel the moisture back to the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity!

  1. The circuit “breathes in” air containing moisture vapour.
  2. The T.R.A.P. breather strips moisture and particulate from the incoming air, allowing only clean, dry air to enter the circuit.
  3. During the “exhalation” cycle, the T.R.A.P breather allows unrestricted airflow outward.
  4. The outflow of dry air picks up the moisture collected by the T.R.A.P breather during intake, and “blows it back out” – fully regenerating the T.R.A.P breather’s water-holding capacity.

Thermally Reactive Advanced Protection (T.R.A.P.™)

Water has a way of sneaking into your storage tanks / hydraulic circuits − unless you have a Donaldson T.R.A.P. breather standing guard over your system.

Donaldson’s T.R.A.P. breather removes moisture at relative humidity levels as low as 15%. T.R.A.P. filtration technology reacts instantly to changes in thermal conditions − blocking moisture.

T.R.A.P. breathers strip moisture vapour from intake air and release it back into the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity. T.R.A.P. breathers expel the moisture back out, eliminating the need to change the breather due to water saturation - unlike desiccant filters that require frequent change-out. T.R.A.P. breathers not only protect against moisture but also provide advanced particulate filtration.

TRAP water before it gets in without restricting air flow, letting your hydraulic and lube oil reservoirs BREATHE.

      • Filter Cross Reference - CATERPILLAR-4302002
      • DN25 (1") Male NPT Thread
      • LED Status Indicator
      • 115mm high

    Donaldson Tank Breather TRAP LED DN25 (1") M NPT P564669

    SKU: P564669

    Donaldson Tank Breather TRAP LED DN25 (1") M NPT P564669

    $107.50 AUD
    $107.50 AUD
    Save $0
    Sold out
    Inclusive of GST. Shipping calculated at checkout.

    Other payment options

    The Basics

    The Donaldson P564669 DN25 (1") LED TRAP Breather, from GO Industrial, features a LED indicator that will flash red once the breather needs to be replaced.  Donaldson T.R.A.P.™ breathers collect and expel moisture out of tanks and drums.

    For every litre of liquid that you dispense from a tank or drum, a litre of air enters the vessel.  This air entering your tank or drum is laden with moisture and dust.  The Donaldson TRAP Breather will filter the moisture and dust from the air entering your tank or drum, ensuring the cleanliness and purity of the liquid being stored.


                Customers also purchased

                Kolor Kut Water Finding Paste

                Kolor Kut Water Finding Paste

                $27.50 AUD
                $27.50 AUD
                GO Industrial Tank Medic Fuel Biocide 5 Litre TM20

                Tank Medic

                From $59.00 AUD
                From $59.00 AUD
                Donaldson P902973 Bulk Tank Kit

                Donaldson Bulk Fuel Tank Kit P902973

                $490.00 AUD
                $490.00 AUD

                Electronic Indicator

                Actuated by pressure differential, flashes red to indicate change out is needed. Indicator setting, 1 psid (6.9kPa). Indicator power source: 3V lithium battery CR2032.

                • GO Data Sheet Donaldson P564669
                • GO Data Sheet Donaldson TRAP Breather Range

                Moisture Meets It's Match

                Donaldson T.R.A.P.™ breathers collect and expel moisture out of tanks and reservoirs. This means you won’t need to change the breather due to water saturation, unlike desiccant filters which require frequent change-out.

                Donaldson TRAP water and particulate before it gets in without restricting air flow − letting your reservoirs breathe easy.

                How It Works

                T.R.A.P.™ breathers from Donaldson are the only breathers on the market that literally strip moisture vapour from intake air and expel the moisture back to the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity!

                1. The circuit “breathes in” air containing moisture vapour.
                2. The T.R.A.P. breather strips moisture and particulate from the incoming air, allowing only clean, dry air to enter the circuit.
                3. During the “exhalation” cycle, the T.R.A.P breather allows unrestricted airflow outward.
                4. The outflow of dry air picks up the moisture collected by the T.R.A.P breather during intake, and “blows it back out” – fully regenerating the T.R.A.P breather’s water-holding capacity.

                Thermally Reactive Advanced Protection (T.R.A.P.™)

                Water has a way of sneaking into your storage tanks / hydraulic circuits − unless you have a Donaldson T.R.A.P. breather standing guard over your system.

                Donaldson’s T.R.A.P. breather removes moisture at relative humidity levels as low as 15%. T.R.A.P. filtration technology reacts instantly to changes in thermal conditions − blocking moisture.

                T.R.A.P. breathers strip moisture vapour from intake air and release it back into the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity. T.R.A.P. breathers expel the moisture back out, eliminating the need to change the breather due to water saturation - unlike desiccant filters that require frequent change-out. T.R.A.P. breathers not only protect against moisture but also provide advanced particulate filtration.

                TRAP water before it gets in without restricting air flow, letting your hydraulic and lube oil reservoirs BREATHE.

                    • Filter Cross Reference - CATERPILLAR-4302002
                    • DN25 (1") Male NPT Thread
                    • LED Status Indicator
                    • 115mm high
                  View full details
                    pagination here

                  Recently Viewed Products