1
GO Double IBC Containment Bund - Polyethylene DBDIBC
  • GO Double IBC Containment Bund - Polyethylene DBDIBC
1 1

GO Double IBC Polyethylene Containment Bund

SKU: DBDIBC

GO Double IBC Polyethylene Containment Bund

$2,090.00 AUD
$2,090.00 AUD
Inclusive of GST. Shipping calculated at checkout.

Other payment options

GO Double IBC Polyethylene Containment Bund

Overview

Store two bulk containers (IBCs) on this spill pallet to capture leaks, drips and spills.

Store two IBCs (intermediate bulk containers) / bulki boxes on this containment bund to capture leaks, drips and spills. These containment bunds are also known as spill pallets and have been designed by Australians in Australia for our unique and harsh conditions.

Portable bunding units are designed for secondary and temporary storage. If you are unsure on your storage compliance obligations, check with your local council or regulatory body.

Details

  • Bunds must be situated on level ground.
  • We regularly hear of spill pallets and bunds collapsing or distorting in the Australian heat sending IBCs and drums to the ground, with their contents spilling dangerously across the workplace. Whilst this may in part be attributed to poorly positioned pallets (non-level ground), imported bunds are not manufactured for the extremes of Australian summer conditions.
  • Imported bunds often have thin walls or added fillers to reduce costs resulting in the bunds collapsing or distorting in the Australian heat.
  • Our heavy wall spill pallets are manufactured from 100% rotationally moulded polyethylene and are load tested by NATA accredited engineers in Victoria, Australia.
  • The bund design (including grate) has undergone a fully loaded compression test maintained for 28 days at 40°C. Test certificates are available upon request.

Specifications

Size 2830mm x 1490mm x 670mm
Weight 141 kgs
Capacity in sump 1470 litres
UDL 3600 kg
Bund material Polyethylene
Grate material Polypropylene 

 

    Features

  • Side-by-side containment without the cost of buying two single units.
  • Chemical resistant polyethylene containment bund and polypropylene grate can endure harsh environments.
  • Removable grated floor allows access to the bund sump for cleaning.
  • Manufactured and tested in Australia with a 3600kg UDL
  • Includes encapsulated data plates with vital information such as sump capacity, maximum UDL, composition materials and net weight.
  • Moulded forklift pockets with dual sided access enable convenient positioning of the containment bund. (Move only when IBC are removed).
  • Large deck allows convenient and safe positioning of IBC so the outlet tap is within the sump boundaries.
  • Bunds designed to stack inside each other for reduced freight cost of multipe units.
  • Optional bund discharge filters are available to allow oil and fuel capture when draining rainwater from the bund. Filter is packed with super absorbent hydrophobic (water-resistant) polypropylene for 30 litres of absorbency. Filter is fitted with an internal flow distributor and quick release camlock adaptor. Replacement filter bags can be ordered individually.

Shipping & Returns

Add text about your shipping policy

Shipping & Returns

Add text about your shipping policy

Warranty

Add text about your product warranty

Warranty

Add text about your product warranty

Secure Payment

Add text about your payment

Secure Payment

Add text about your payment

View full details
GO Double IBC Containment Bund - Polyethylene DBDIBC

GO Double IBC Polyethylene Containment Bund

$2,090.00 AUD
$2,090.00 AUD

Details

  • Bunds must be situated on level ground.
  • We regularly hear of spill pallets and bunds collapsing or distorting in the Australian heat sending IBCs and drums to the ground, with their contents spilling dangerously across the workplace. Whilst this may in part be attributed to poorly positioned pallets (non-level ground), imported bunds are not manufactured for the extremes of Australian summer conditions.
  • Imported bunds often have thin walls or added fillers to reduce costs resulting in the bunds collapsing or distorting in the Australian heat.
  • Our heavy wall spill pallets are manufactured from 100% rotationally moulded polyethylene and are load tested by NATA accredited engineers in Victoria, Australia.
  • The bund design (including grate) has undergone a fully loaded compression test maintained for 28 days at 40°C. Test certificates are available upon request.

Features

  • Side-by-side containment without the cost of buying two single units.
  • Chemical resistant polyethylene containment bund and polypropylene grate can endure harsh environments.
  • Removable grated floor allows access to the bund sump for cleaning.
  • Manufactured and tested in Australia with a 3600kg UDL
  • Includes encapsulated data plates with vital information such as sump capacity, maximum UDL, composition materials and net weight.
  • Moulded forklift pockets with dual sided access enable convenient positioning of the containment bund. (Move only when IBC are removed).
  • Large deck allows convenient and safe positioning of IBC so the outlet tap is within the sump boundaries.
  • Bunds designed to stack inside each other for reduced freight cost of multipe units.
  • Optional bund discharge filters are available to allow oil and fuel capture when draining rainwater from the bund. Filter is packed with super absorbent hydrophobic (water-resistant) polypropylene for 30 litres of absorbency. Filter is fitted with an internal flow distributor and quick release camlock adaptor. Replacement filter bags can be ordered individually.

    • GO Double IBC Polyethylene Containment Bund

    Overview

    Store two bulk containers (IBCs) on this spill pallet to capture leaks, drips and spills.

    Store two IBCs (intermediate bulk containers) / bulki boxes on this containment bund to capture leaks, drips and spills. These containment bunds are also known as spill pallets and have been designed by Australians in Australia for our unique and harsh conditions.

    Portable bunding units are designed for secondary and temporary storage. If you are unsure on your storage compliance obligations, check with your local council or regulatory body.

    Shipping & Returns

    Our network of warehouses Australia-wide enables us to
    deliver anywhere in Australia except to PO Boxes. We aim to ship your order within 1-3 days upon receipt of payment, as long as the item is readily available.

    All returns must be pre-approved to ensure replacement and / or refund.

    Shipping & Returns

    Our network of warehouses Australia-wide enables us to
    deliver anywhere in Australia except to PO Boxes. We aim to ship your order within 1-3 days upon receipt of payment, as long as the item is readily available.

    All returns must be pre-approved to ensure replacement and / or refund.

    Warranty

    Read our complete warranty terms & conditions here.

    Warranty

    Read our complete warranty terms & conditions here.

    Secure Payment

    All our online payment methods are secured.

    Secure Payment

    All our online payment methods are secured.

    Specifications

    Size 2830mm x 1490mm x 670mm
    Weight 141 kgs
    Capacity in sump 1470 litres
    UDL 3600 kg
    Bund material Polyethylene
    Grate material Polypropylene 

     

      Features

    • Side-by-side containment without the cost of buying two single units.
    • Chemical resistant polyethylene containment bund and polypropylene grate can endure harsh environments.
    • Removable grated floor allows access to the bund sump for cleaning.
    • Manufactured and tested in Australia with a 3600kg UDL
    • Includes encapsulated data plates with vital information such as sump capacity, maximum UDL, composition materials and net weight.
    • Moulded forklift pockets with dual sided access enable convenient positioning of the containment bund. (Move only when IBC are removed).
    • Large deck allows convenient and safe positioning of IBC so the outlet tap is within the sump boundaries.
    • Bunds designed to stack inside each other for reduced freight cost of multipe units.
    • Optional bund discharge filters are available to allow oil and fuel capture when draining rainwater from the bund. Filter is packed with super absorbent hydrophobic (water-resistant) polypropylene for 30 litres of absorbency. Filter is fitted with an internal flow distributor and quick release camlock adaptor. Replacement filter bags can be ordered individually.
      pagination here

    Recently Viewed Products