GRACO Spray Gun Pro Xp60 and Xp60 AA Electrostatic Range

SKU: L60T10

$7,341.60

GRACO Spray Gun Pro Xp60 and Xp60 AA Electrostatic Range

  • Graco Electrostatic Air Spray Guns Deliver Expert Performance

Graco Pro Xp60 and Xp60 AA - Summary

  • Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist gun on the market – delivering a consistent, high quality finish every time you spray
  • Our improved tip line delivers a high quality finish for a variety of applications.
  • Plus, the pre-orifice tips atomise paints for fine finish applications.
  • Graco Pro Xp60 AA gun line includes Standard, Smart and Waterborne models.

    Graco Pro Xp60 and Xp60 AA - Features

    • High quality spray performance with a one-piece aircap and variety of spray tips
    • Transfer efficiency is improved over conventional air-assist guns
    • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
    • Made in the USA
    • The smallest profile gun with internal power supply on the market – 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter
    • Fan adjust pattern control reduces overspray by changing the fan pattern width according to the size of the part – improving quality and saving you money
    • Rugged, dependable design supported by a three year warranty
    • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

              Downloads

                DATA SHEET
                DATA SHEET - WATERBORNE SPRAY GUNS
                MANUAL
                MANUAL - WATERBORNE SPRAY GUNS
                MANUAL - ROUND SPRAY KIT
                VIDEO - ANIMATION
                VIDEO - OVERVIEW
                VIDEO - CONTROLS OVERVIEW

                VIDEO - ELECTROSTATIC GUN BASICS

                VIDEO - TRANSFER EFFICIENCY
                VIDEO - SET UP AND PRIME
                VIDEO - PARTS
                VIDEO - DISASSEMBLY
                VIDEO - ASSEMBLY

                Specifications - Graco Pro Xp60

                Maximum Working Fluid Pressure
                0.7 MPa, 7.0 bar
                Maximum Working Air Pressure
                0.7 MPa, 7.0 bar
                Minimum Air Pressure at Gun Inlet
                0.32 MPa, 3.2 bar
                Maximum Fluid Operating Temperature
                48°C
                Paint Resistivity Range
                3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
                Air Inlet Fitting
                1/4 npsm(m) left-hand thread
                Fluid Inlet Fitting
                3/8 npsm(m)
                Output Voltage
                Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
                Maximum Current Draw
                125 microamperes
                Sound Power (measured per ISO Standard 9216)
                at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7.0 bar: 105.4 dB(A)
                Sound Pressure (measured 1 m from gun)
                at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
                Wetted Parts
                PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene

                Specifications - Graco Pro Xp60 AA

                Maximum Working Fluid Pressure
                21 MPa, 210 bar
                Maximum Working Air Pressure
                0.7 MPa, 7.0 bar
                Minimum Air Pressure at Gun Inlet
                0.32 MPa, 3.2 bar
                Maximum Fluid Operating Temperature
                48°C
                Paint Resistivity Range
                3 megohm/cm to infinity
                Air Inlet Fitting
                1/4 npsm(m) left-hand thread
                Fluid Inlet Fitting
                1/4–18 npsm(m)
                Output Voltage
                Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
                Maximum Current Draw
                125 microamperes
                Sound Power (measured per ISO Standard 9216)
                at 0.28 MPa, 2.8 bar: 88.9 dB(A) at 0.7 MPa, 7.0 bar: 99.7 dB(A)
                Sound Pressure (measured 1 m from gun)
                at 0.28 MPa, 2.8 bar: 86.0 dB(A) at 0.7 MPa, 7.0 bar: 95.0 dB(A)
                Wetted Parts
                PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene

                GO Industrial Authorised Service and Warranty Agents

                 

                GO Industrial Delivery and Shipping

                You may also like

                Recently viewed