LuminoKrom Photoluminescent Line Marking Paint (Yellow) - GO Industrial - LK-WBO-YEL-5KG

LuminoKrom Photoluminescent Line Marking Paint (Yellow)

SKU LK-WBO-YEL-5KG
Afterpay Zip PayPal LeaseGO
$1,996.50
Tax included. Shipping calculated at checkout.
Size
Quantity
Contact for pricing
No stock main warehouse, contact for lead time

Same-day dispatch

In-stock orders by 2pm AEST

Australia-wide delivery

Direct to your job from Brisbane

Authorised service

In-house warranty + repairs

Trade pricing for all

No trade-only accounts

Product details

LuminoKrom is a photoluminescent line marking paint that charges off daylight and gives back 6 hours of night-time visibility without drawing a watt of power. It is used to mark cycle paths, greenways, footpaths, pedestrian crossings, car parks and hazard zones where running lighting is impractical, expensive or unwanted, including dark-sky areas and sites with no power at all.

This is the water-based yellow version for outdoor and indoor use. It goes onto asphalt, concrete, cement and plasterboard over a white undercoat, laid on by brush or roller at 900 g/m2. A 20 kg pail covers roughly 22 m2 at that dosage. Slip resistance is SRT greater than 0.50 to NF EN 1436, and adding aggregate before the final coat takes it to 0.70. Expect 5 to 10 years of service before reapplication.

Luminescence is certified to CE ISO 17398 at Class E. The paint is ready to use and needs no dilution. Made in France. Sizes are 5 kg, 10 kg and 20 kg. Talk to our team on 07 3204 2240 for help sizing a job, matching an undercoat or setting up a spray application.

Features
  • Certified Luminescence: Rated Class E to CE ISO 17398, giving 6 hours of night-time visibility from a full daylight charge.

  • Zero Power Draw: Captures daylight and releases it after dark with no electricity, no cabling and no emissions in use, so it works on sites with no power at all.

  • Instant Recharge: Comes back to full output after about 15 minutes at 1000 lux, and keeps working through a power cut when lit signage does not.

  • Slip Resistant: SRT greater than 0.50 to NF EN 1436, and up to 0.70 when aggregate is broadcast before the final coat, so it suits footpaths and pedestrian crossings.

  • Ready To Use: No dilution and no mixing. Brush and 6 to 8 mm nap roller are the published methods, and we can work with you on a spray setup where the job calls for it.

  • Broad Substrate Range: Bonds to asphalt, concrete, cement and plasterboard, which covers most outdoor pavement and indoor floor and wall work.

  • Durable Service Life: 5 to 10 years before reapplication is recommended, with resistance to abrasion, repeated foot traffic and freeze-thaw cycling.

  • Three Pack Sizes: 5 kg, 10 kg and 20 kg pails covering roughly 5.5 m2, 11 m2 and 22 m2 at the specified 900 g/m2 dosage.

  • Made In France: Produced under an ISO 9001 certified quality system using patented photoluminescent pigment technology.
Specifications
BRAND LuminoKrom
PRODUCT TYPE Photoluminescent line marking paint
PAINT BASE Water-based
USE Outdoor and indoor
COLOUR DAY | NIGHT Yellow / green
LUMINESCENCE CLASS CLASS E (CE ISO 17398)
NIGHT-TIME VISIBILITY 6 HOURS
VISIBILITY RANGE UP TO 70 M IN UNLIT AREAS
RECHARGE TIME 15 MIN AT 1000 LUX
PACK SIZES 5 KG | 10 KG | 20 KG
DOSAGE 900 G/M2 (LUMINOKROM COAT)
UNDERCOAT DOSAGE 400 - 600 G/M2 WHITE
COVERAGE APPROX. 22 M2 PER 20 KG | 11 M2 PER 10 KG | 5.5 M2 PER 5 KG
SUBSTRATES Asphalt, concrete (bituminous or cement), cement, plasterboard
APPLICATION METHOD Brush or 6 - 8 mm nap roller. Spray application on request
NUMBER OF COATS 2 - 3 by brush | 3 - 4 by roller
SUBSTRATE TEMPERATURE 10 C - 40 C
AMBIENT TEMPERATURE 15 C - 35 C
MAXIMUM HUMIDITY 85%
TOUCH DRY 30 MIN
RECOAT INTERVAL 2 H MINIMUM
HARD DRY 48 H
FULL CURE 7 DAYS
REOPEN TO TRAFFIC 24 H
SLIP RESISTANCE SRT > 0.50 (NF EN 1436). Up to 0.70 with aggregate before final coat
SERVICE LIFE 5 - 10 YEARS BEFORE REAPPLICATION
DILUTION Ready to use, do not dilute
CLEAN UP Water
COUNTRY OF MANUFACTURE France
Data Sheet
Application Guide
Safety Data Sheet
Product Range Brochure
Local Government Brochure
Industrial Safety Brochure
Creative Applications Brochure
Shipping & Returns

Same-day dispatch from one of our national warehouses on in-stock orders placed before 2pm AEST.

30-day returns on unopened, stocked items — customer pays return freight. Non-stocked / special-order items are subject to a 50% restocking fee.

Read full policy ›

FAQs

Common questions.

How long does LuminoKrom Yellow glow for after dark?
Yellow holds Class E luminescence certified to CE ISO 17398, tested by a certified laboratory. That works out to around 6 hours of usable night-time visibility from a full charge, and the marking recharges itself the next day off daylight.
How is it applied?
Brush and roller are the published methods. Use a brush suited to water-based paints or a 6 to 8 mm nap roller, and build 2 to 3 coats by brush or 3 to 4 by roller to reach the 900 g/m2 dosage. Spray application is possible and we can help you set it up, so talk to us on 07 3204 2240 before you commit a machine to it.
How much area does a pail cover?
At the specified 900 g/m2 dosage a 20 kg pail covers about 22 m2, a 10 kg pail about 11 m2 and a 5 kg pail about 5.5 m2. You also need a white undercoat at 400 to 600 g/m2 underneath, so allow for that separately when you are pricing a job.
Does it need an undercoat?
Yes. Apply a white undercoat at 400 to 600 g/m2 and let it dry for the time the undercoat supplier specifies before the LuminoKrom goes on. The white base reflects the stored light back out of the marking and is what delivers the rated luminescence.
What surfaces can it go on and what conditions do I need?
Asphalt, concrete (bituminous or cement), cement and plasterboard, all clean and dry. New concrete or hydrocarbon surfaces need to be at least four weeks old before you paint. Substrate temperature 10 to 40 C, ambient 15 to 35 C, humidity under 85%.
How long before traffic can go back over it?
Touch dry is 30 minutes and you need a minimum of 2 hours between coats. Leave it 24 hours before reopening to traffic. Hard dry is 48 hours and full cure is 7 days.
How long does the marking last?
Expect 5 to 10 years of service before reapplication is recommended. It resists abrasion, repeated foot traffic and freeze-thaw cycling. Slip resistance is SRT greater than 0.50 to NF EN 1436, and aggregate broadcast before the last coat lifts that to 0.70.
Is this a replacement for street lighting?
No. It is a passive light guide, not a lighting product. It warns users of hazards and guides them along unlit routes without drawing power or needing any cabling, which suits greenways, cycle paths, dark-sky areas, remote paths and sites where power is impractical.

Need help speccing your kit?

Talk to a real specialist on our team. We'll match the right unit to your daily volume and the materials you spray most.

Chat with usEmail us