GRACO Husky 716 Aluminum Air Operated Diaphragm Pumps
SKU: D5C211GRACO Husky 716 Aluminum Air Operated Diaphragm Pumps
Other payment options
GRACO Husky 716 Aluminum Air Operated Diaphragm Pumps
Features
Graco Husky 716 Aluminum Air Operated Diaphragm Pumps
Overview
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
Choose from a wide selection of materials to handle numerous applications, including corrosive and abrasive fluid transfer.
Specifications
| TECHNICAL SPECIFICATIONS | |
| TYPE | Pneumatic Diaphragm Pump |
| AIR INLET SIZE (IN) | 1/4 |
| AIR INLET THREAD GENDER | Female |
| AIR INLET THREAD TYPE | NPT |
| APPLICATION | Industrial |
| BALL MATERIAL | PTFE [D5C211, D53311, D53311] Buna-N [D5C277] |
| CENTER SECTION MATERIAL | Polypropylene |
| COMPATIBLE MATERIAL | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| DIAPHRAGM MATERIAL | PTFE/EPDM 2-Piece [D5C211, D53311, D53311] Buna-N [D5C277] |
| FLUID INLET SIZE (CM) | 1.905 |
| FLUID INLET SIZE (IN) | 3/4 |
| FLUID INLET SIZE (MM) | 19.05 |
| FLUID INLET THREAD GENDER | Female [D53311] |
| FLUID INLET THREAD TYPE | BSPT [D5C211, D53311, D5C277] |
| FLUID OUTLET SIZE (CM) | 1.905 |
| FLUID OUTLET SIZE (IN) | 3/4 |
| FLUID OUTLET SIZE (MM) | 19.05 |
| FLUID OUTLET THREAD GENDER | Female [D53311] |
| FLUID OUTLET THREAD TYPE | BSPT [D5C211, D53311, D5C277] |
| FLUID SECTION MATERIAL | Aluminum |
| MANIFOLD CONFIGURATION | Center Port |
| MANIFOLD O-RING MATERIAL | PTFE |
| MATERIAL | Aluminum |
| MAXIMUM AIR CONSUMPTION (SCFM) | 28 |
| MAXIMUM AIR PRESSURE (BAR) | 6.9 |
| MAXIMUM AIR PRESSURE (KPA) | 690 |
| MAXIMUM AIR PRESSURE (PSI) | 100 |
| MAXIMUM CYCLE RATE (CPM) | 400 |
| MAXIMUM FLOW RATE (GPM) | 16 |
| MAXIMUM FLOW RATE (L/MIN) | 60.6 |
| MAXIMUM FLUID PRESSURE (BAR) | 6.9 |
| MAXIMUM FLUID PRESSURE (KPA) | 690 |
| MAXIMUM FLUID PRESSURE (PSI) | 100 |
| MAXIMUM OPERATING TEMPERATURE (°C) | 107 |
| MAXIMUM OPERATING TEMPERATURE (°F) | 225 |
| MAXIMUM SOLID SIZE (CM) | 0.2383 |
| MAXIMUM SOLID SIZE (IN) | 0.09375 |
| MAXIMUM SOLID SIZE (MM) | 2.383 |
| MINIMUM OPERATING TEMPERATURE (°C) | 4 |
| MINIMUM OPERATING TEMPERATURE (°F) | 40 |
| MODEL | Husky |
| POWER SOURCE | Air |
| SEAT MATERIAL | Acetal [D5C211, D5C277] Stainless Steel [D53311, D53311] |
| SERIES | 716 |
| STANDARDS MET | ATEX, CE |
| WEIGHT (LB) | 8.5 |
| MAXIMUM FLUID PRESSURE (MPA) | 0.69 |
| MAXIMUM AIR PRESSURE (MPA) | 0.69 |
| CONNECTION TYPE | Threaded |
| DIAPHRAGM_COMPATIBLE_MATERIAL | PTFE [D5C211, D53311, D53311] Buna [D5C277] |
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Features
Recently Viewed Products
Join 190+ Happy GOers
Over 16,000 Orders Shipped
An absolutely impeccable process, from ordering, to the super fast delivery, the the top quality of the product.
"Mirka is everything they say it is. Saved me so much time hand sanding. The service was great and the parcels arrived so quick."
Bob Ware joined the Dust-Free Sanding Revolution
55+ GO Staff & Growing, Australia-wide.
One of the nicest and friendliest companies I have had the pleasure to deal with. Customer service is pretty slack in companies now but, you guys exemplify what good old customer service used to be - THANK YOU!!!!
The service from the staff was above expectations. The setup and use videos were a great asset also and sealed the deal for me.
Keep up the great work GO Industrial.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
